1. Sometimes you will need to re-acknowledge a server in order to clear alarms in the UCS/HyperFlex system. Start off by ensuring the server is in maintenance mode if it is linked in vCenter (this will help offload important VMs if in vMotion, and prevent issues in vCenter).
2. Next, log into your UCS manager.
3. Once you are logged into the UCS manager, navigate to the Equipment tab in the top left of the screen.
4. From the Equipment tab, expand the following:
a. Equipment>Servers>Server you wish to work on.
5. From here, click on the “Server Maintenance” in the “Actions” section. Also, I found out if you use the "reset" option it is displayed here too, a few ways you can get to it.
6. Select “Re-Acknowledge” from the selection and then click “OK”.
7. The process can take anywhere from 10-40 minutes depending on the system you are utilizing.
8. Verify errors have cleared.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Server-Mgmt/3-1/b_Cisco_UCS_Manager_Server_Mgmt_Guide_3_1/b_Cisco_UCS_Manager_Server_Mgmt_Guide_3_1_chapter_01001.html#task_DAD508E1ACC2406B81D00C1099E442EF
2. Next, log into your UCS manager.
3. Once you are logged into the UCS manager, navigate to the Equipment tab in the top left of the screen.
4. From the Equipment tab, expand the following:
a. Equipment>Servers>Server you wish to work on.
5. From here, click on the “Server Maintenance” in the “Actions” section. Also, I found out if you use the "reset" option it is displayed here too, a few ways you can get to it.
6. Select “Re-Acknowledge” from the selection and then click “OK”.
7. The process can take anywhere from 10-40 minutes depending on the system you are utilizing.
8. Verify errors have cleared.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Server-Mgmt/3-1/b_Cisco_UCS_Manager_Server_Mgmt_Guide_3_1/b_Cisco_UCS_Manager_Server_Mgmt_Guide_3_1_chapter_01001.html#task_DAD508E1ACC2406B81D00C1099E442EF
No comments:
Post a Comment