What's Popular

Meh, Whatever is Featured

Linking Active Directory to Palo Alto

 ###First you need to create a server profile under the LDAP section. DEVICE>Server Profiles>LDAP then click on the Add down at the bo...

Friday, March 1, 2019

Upload Firmware into UCSM (GUI)

1.    First off, log into your UCSM system you wish to upload to.
2.    Next, click on the following tabs:
    a.    Equipment
    b.    Firmware Management
    c.    Installed Firmware
3.    Next, under the “Installed Firmware” section, click on “Download Firmware”. This option means the Fabric Interconnects (FIs) themselves will download the software into their flash. Not you downloading the software yourself. It is confusing at first, but remember this is you pushing the firmware to the FIs and they download it.
4.    After you click this, then you can select the file you wish to upload and then click “OK”.
5.    Your software will start uploading into the FI so it can download. If you need to check the progress of the download, click on the “Download Tasks” tab to the right of the “Installed Firmware” tab.
6.    Finally, you can verify your firmware was uploaded/downloaded by selecting the “Packages” tab and you should see your new firmware upload in here.

Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Firmware-Mgmt/4-0/b_UCSM_GUI_Firmware_Management_Guide_4-0/b_UCSM_GUI_Firmware_Management_Guide_4-0_chapter_0100.html#task_0EE4036D9F434685A3CD94EBC0501B66

No comments:

Post a Comment